How to Reset Maintenance Light on Toyota Corolla

If you’re taking care of recommended maintenance tasks of your 2020 Toyota Corolla on your own, you may notice that your maintenance light stays on. If you need to turn off the Toyota maintenance light, the Toyota Corolla makes it quick and simple. Earl Stewart Toyota has a handy guide with quick steps on how West Palm Beach drivers can turn off the maintenance light on a Toyota Corolla. You can also stop by our Lake Park service center and we’ll be happy to check the vehicle to make sure all required maintenance has been performed correctly.

Turn Off Maintenance Light – Toyota Corolla

It’s essential to keep up with routine maintenance on all Toyota vehicles, and that includes the new Toyota Corolla. However, if you’re a do-it-yourselfer who plans on taking care of the oil changes and tire rotations, you will have to reset the maintenance required light after the vehicle has been serviced. That’s where this guide can help:

1. Insert the keys in the Corolla. Turn the key to the “On” position, but don’t start the car.
2. Press and hold the trip reset button near the odometer until “Trip A” appears on the central screen.
3. Turn the key back to “Off.”
4. While pressing the button to reset the trip, turn the key back to the “On” position.
5. Keep holding the trip reset button until the miles section of the odometer flashes zero. At this point, the maintenance light will turn off.

If that doesn’t work, try repeating those steps. If you are experiencing any issues, stop by the West Palm Beach-area service center at Earl Stewart Toyota. We’ll inspect your vehicle and diagnose what the problem is to get you back on the road in a timely manner.

Reset Maintenance Light With Color Display

If your Corolla has a color multi-information display, you may have a different setup. You can take these steps to turn the maintenance light off:

1. Turn the key to on, but don’t start the engine. It may be marked as “II” on the ignition.
2. If your Corolla has a push-button ignition, press the start button twice while keeping your foot off the brake.
3. Select the cog icon on the multi-information display.
4. Select “Scheduled Maintenance” on the display.
5. The screen will ask you to confirm your selection. Select “Ok.”

Visit Earl Stewart Toyota Near Palm Beach Gardens for Service

For any other questions on how to reset maintenance light on Toyota Corolla, what causes a car to overheat, or to learn how to replace a battery in a Toyota keyfob, feel free to contact Earl Stewart Toyota. We’re happy to help you out with a Toyota Corolla maintenance schedule! Don’t forget to take a look at our rotating service specials.